Bottle and Tube Labels
USA Scientific Inc Laser Tough-Tags 15 mL & 50 mL
Laser Tough-Tags for 15 mL & 50 mL Tubes, Yellow, 1.5inch L x 0.75 W, 60 Labels/Sheet, 25 Sheets, (1500 Labels)
Chemglass Life Sciences Laser Cryo-Babies Labels, 1.5mL Tubes, 1.28" x 0.50", Green, 1, 700/Pk
Laser Cryo-Babies Labels, 1.5mL Tubes, 1.28" x 0.50", Green, 1,700/Pk. Cryo-babies and Cryo-tags pre-cut chemically inert, polyolefin cryogenic storage labels resist most organic solvents and caustic agents. Labels will accept any marking instrument, and easily peel off backing sheet for application. They adhere to most plastics, glass, and metals without cracking, peeling, or degrading. Temperature-resistant from -196 to 100C, withstand boiling water baths, moderate oven temperatures (150C), autoclaving, and extreme freezer temperatures (liquid and vapor phase nitrogen). Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam in laser printers. Ideally sized, they will fit a wide variety of cryovials, microtubes, storage boxes and other containers. Rainbow packs include four sheets of each color: blue, green, orange, red and yellow. Cryo-Tags and Cryo-Babies are a registered trademark of Diversified Biotech.
Electron Microscopy Sciences NitroTAG™ Cryo Barcodes 1¼ x 5/8" w/ dot 3/8" on 1" core, White
These cryo barcode labels for liquid nitrogen storage feature an extra-permanent adhesive for secure long-term biopreservation under cryogenic laboratory conditions, including helium, liquid, and vapor phase liquid nitrogen, freezers, and dry ice transportation. The labels are ideal for use on cryo boxes, vials, tubes, plastic bags, and plates. They are resistant to alcohol and multiple freeze-thaw cycles and no cure time allows submerging in liquid nitrogen immediately. With extra-permanent adhesives, they will stick to wet surfaces. Corners are rounded. The labels are compatible with most thermal-transfer printers.
Size: 1¼ x 5/8"
Color: White
Core: 1" core
Labels across: 1 rect + 1 cir
Perforated: Yes
GA International Permanent Cryo-LazrTAG™- Deep-Freeze Labels for Laser Printers (US Letter Size) PATENTED
Thermoplastic waterproof labels are specifically designed to permanently adhere to vials, microtubes, microplates, glass tubes, freezer boxes, polycarbonate cryo boxes, and other containers that will undergo long-term deep-freeze or cryogenic storage in liquid or vapor phase liquid nitrogen, laboratory freezers, as well as transportation on dry ice. Resistant to multiple freeze-thaw cycles without fading, detaching, or wrinkling, these laser labels are provided in sheet format for printing with desktop and office laser printers, are wear-and-tear proof, will not jam printers, and resist UV and gamma irradiation.
GA International Cryogenic Multi Color Labels for 1.5 mL Microtubes 1.02" x 0.4" / 25.9mm x 10.2mm Rectangle Pink From -196°C to +110°C (-321°F to +230°F)
Ideal for the identification of vials, microtubes, plastic bags, and other containers used in deep-freeze storage and color-coding in harsh laboratory environments. These labels are designed for reliable performance in extreme cold conditions, including liquid nitrogen exposure.They write easily with permanent markers—recommended options include MP-1, F-1, and SM-1.
Alkali Scientific ASI™ Laboratory Label, Color Coded Dot – Roll Form - 1/2", 1000 per Roll, 1/Roll, Dark Red
We offer cryogenic storage labels that use a special adhesive designed exactly for vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers. Our cryogenic storage labels will stick in temperatures ranging from 194° F (90°C) to as low as -94°F (-70°C).
GA International DYMO-Compatible Cryogenic Labels 0.94" x 0.5" + 0.437" (circle) / 23.9mm x 12.7mm + 11.1mm (circle) Rectangle + Circle Pink From -196°C to +70°C (-320.8°F to +158°F)
DYMO compatible direct thermal cryo labels. For ultra-low and cryogenic temperature applications (as low as -196°C). Ideal for identification and permanent storage of vials and containers in liquid nitrogen and laboratory freezers (-80°C, -50°C, -20°C).
GA International Paper Labels for Thermal-Transfer Printers 0.875" x 0.875" / 22.2mm x 22.2mm Rectangle White From -20°C to +120°C (-4°F to +248°F)
General use paper labels for thermal-transfer printers. Provided with a permanent adhesive in a range of colors, they are ideal for use as shipping labels, color coding, price tagging, warehouses, logistics, and sorting facilities as well as general office and laboratory organization.
GA International Cryogenic Color Dots Labels 0.75" / 19.1mm Circle Green Seafoam From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for tube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage*. Specially designed to comfortably fit 15 ml and 50 ml Falcon tube caps, bottle caps, as well as cryo and freezer boxes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
GA International Cryogenic Labels (Writable) 0.5" / 12.7mm Circle Moka From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for liquid nitrogen storage (Subject to prior verification of compatibility of labels and intended vial cap material in Liquid Nitrogen), -80°C freezers and dry ice. Specially designed to comfortably fit cryovials and Eppendorf tube caps. These waterproof deep-freeze dot labels are supplied in roll format and are available in 15 individual colors as well as packs of 15 assorted colors for color-coding and rapid identification.
GA International Removable Cryogenic Labels for Laser Printers 0.94" x 0.5" / 23.9mm x 12.7mm Rectangle Red From -196°C to +120°C (-321°F to +248°F)
Cryogenic thermoplastic laser labels with a glove-friendly removable adhesive. Ideal for long-term storage of samples in liquid nitrogen (on flat surfaces such as polycarbonate cryo boxes) and harsh deep-freeze environments (as low as -80°C; on vials, tubes, freezer boxes, microplates, and others) used in biomedical research and clinical laboratories. Cryo labels accept desktop laser printing and permanent markers. Water-resistant; wear and tear proof; do not jam printers; resistant to UV and gamma irradiation.
Electron Microscopy Sciences Cryo-Babies Labels on a Roll for General Purpose, Orange, 38 mm x 19m
Convenient dispensing box assists in labeling individual tubes used in small experiments. PVC labels accept writing from most lab markers including our Solvent Resistant Pens and Teeny Writers.
Use: General Purpose
Color: Orange
Size: 38 mm x 19m
Alkali Scientific ASI™ Laboratory Label, Color Coded Dot – Roll Form - 1/4", 1000 per Roll, 1/Roll, Magenta
Label, Color Coded Dot – Roll Form - 1/4" We offer cryogenic storage labels that use a special adhesive designed exactly for vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers. Our cryogenic storage labels will stick in temperatures ranging from 194° F (90°C) to as low as -94°F (-70°C).
Electron Microscopy Sciences HyhiTAG™ Thermal Labels 2 x 4", Green 3"
Use these high temperature labels for the identification of various containers and surfaces for autoclaving and dry heat sterilization.
Apply them to metal, plastic, and glass surfaces. They will withstand autoclave sterilization cycles at 132 deg C at 30psi pressure.
These labels and their print will survive high temperature exposures and are ideal for identifying containers and surfaces that need to be sterilized inside autoclaves, dry-heat sterilizing equipment and gamma irradiators.
Waterproof and weatherproof. Temperature range from -60 deg C to +150 deg C.
Color: Green
Core: 3"
Perforated: Yes
Labels across: 1
: